Furuno FSV-84 User Manual download pdf (Page 56)

3-8

CIF BAUD RATE: Set the transmission rate for the CIF port. If the CS-120A is connected,

choose “2400 bps”. (2400 bps, 4800 bps

, 9600 bps, 19200 bps)

AUX BAUD RATE: Set the transmission rate for the AUX port. (2400 bps, 4800 bps, 9600

bps, 19200 bps

)

SENSOR BAUD RATE: Set baud rate of satellite compass, connected to the transceiver

unit. (4800 bps, 9600 bps, 19200 bps, 38400 bps

.) For SC-50/SC-110, select 38400 bps.

Note: Set NMEA output for SC-50/SC-110 as follows:

- Output format: IEC ed1

- Sentence: ATT, HVE (turn off all other sentences except those two)

- Baud rate: 38400 bps

- Interval: 25 ms

(Any talker)

EXT KP INPUT: Set the input logic of KP from external equipment. (DISABLE

, ↑, ↓)

DISABLE: Disable external KP.

↑: Synchronize with leading edge of input pulse.

↓: Synchronize with trailing edge of input pulse

Note: To transmit with external KP, set the TX INTERNAL to “0” in the H-SCAN SETTING

menu.

EXT KP OUTPUT: Choose the KP output logic, POSITIVE or NEGATIVE. (POSITIVE,

NEGATIVE

)

3.4.2 EXT DATA SETTING menu

MENU QUIT

QUIT

DATE&TIME : CIF

HEADING : AD10S

LOG PULSE : 200p/NM

SPEED&COURSE : NMEA

SPEED SENSOR : GPS/DR

LAT/LON : NMEA

POSITIONING SENSOR : AUTO SEL.

WATER DEPTH : NMEA

WATER TEMP. : NMEA

WATER CURRENT : CIF

WIND : CIF

NET DEPTH : PULSE

EXT DATA SETTING

EXT DATA SETTING menu

DATE & TIME: Choose the input format for data and time data. (NONE, CIF

, NMEA)

HEADING: Choose the input format for heading data. (NONE, AD10S

, CIF, NMEA)

LOG PULSE: Set the log pulse rate for the log signal. (200 p/NM

, 400 p/NM)

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 94 95

Comments to this Manuals

No comments

Furuno FSV-84 User Manual Page 56

Comments to this Manuals

Related products and manuals for Air equipment Furuno FSV-84