Furuno FSV-84 User Manual download pdf (Page 29)

2-1

2. WIRING

2.1 How to Use the Crimping Tool, Pin Extractor

A special crimping tool is necessary for connection of wires to the contact pins of the 38P

connector. The pin extractor removes the contact pin from the connector body. This

paragraph describes how to crimp and extract the contact pin.

Crimping Tool

06-1001-016

Contact Pin

60-8017-0313-00339F

(000-159-417-10)

Pin Extractor

06-1877-04

(000-519-595)

Crimping tool, contact pin, pin extractor

2.1.1 How to use the crimping tool

1. Remove the vinyl sheath by 3 to 4 mm to expose the

core.

2. Hold the crimping tool horizontally and insert the

contact pin with its slit facing downward into the crimp

hole on the crimping tool.

3. Insert the wire onto the contact pin and squeeze the

handle until the rachet releases. (The wire should be

placed deep enough into the contact pin so that its end

comes in contact with the stopper plate of the crimping

tool.) With crimping completed, pull the wire while

holding the contact pin to make sure that it is tightly

fastened.

2.1.2 How to use the pin extractor

If a contact pin is inserted into an incorrect hole on the

connector body, remove it with the pin extractor.

1. Push the pin extractor into the pin hole from the side

opposite to the pin inserting side.

2. Push in the head of the pin extractor. The retaining

spring comes free and the contact pin can be removed.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 94 95

No comments

Furuno FSV-84 User Manual Page 29