Furuno GP-150 User Manual Page 48
- Page / 97
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
7. ALARMS
7-4
7.5 Water Temperature
Alarm
The water temperature alarm sounds when
the water temperature is higher or lower (or
within) the preset temperature. This alarm
requires temperature signal from external
equipment.
1) Press MENU ESC and 4.
2) Press
or to select Water Temp.
3) Press
or to select In (or Over).
4) Press
to select Temp. Range.
5) Key in low temperature.
6) Key in high temperature.
7) Press the NU/CU ENT key.
8) Press the MENU ESC key.
When the water temperature is higher or
lower (or within) the preset value, the buzzer
sounds and the message "Water temp
alarm" appears. You can silence the audible
alarm by pressing the CLEAR key. To erase
the visual alarm, press the CLEAR key
again.
To disable the alarm, select Off at step 3.
7.6 Depth Alarm
The depth temperature alarm sounds when
the depth is higher or lower (or within) the
preset depth. This alarm requires video
sounder connection.
1) Press MENU ESC and 4.
2) Press
or to select Depth.
3) Press
or to select In (or Over).
4) Press
to select Depth Range.
5) Key in low depth.
6) Key in high depth.
7) Press the NU/CU ENT key.
8) Press the MENU ESC key.
When the depth is higher or lower (or within)
the preset value, the buzzer sounds and the
message "Depth alarm" appears. You can
silence the audible alarm by pressing the
CLEAR key. To erase the visual alarm, press
the CLEAR key again.
To disable the alarm, select Off at step 3.
7.7 WAAS/DGPS Alarm
The WAAS/DGPS alarm sounds when the
WAAS/DGPS signal is lost. This alarm may
be enabled or disabled as below.
1) Press MENU ESC and 4.
2) Press
or to select WAAS/DGPS.
3) Press
to select On, or to select off.
4) Press the NU/CU/ENT key.
5) Press the MENU ESC key.
- GPS NAVIGATOR 1
- (( HIMAHIMA )) 2
- GP-150GP-150 2
- IMPORTANT NOTICE 3
- SAFETY INSTRUCTIONS 4
- TABLE OF 5
- CONTENTS 5
- FOREWORD 6
- SYSTEM CONFIGURATION 7
- 1. OPERATIONAL OVERVIEW 9
- 1.2 Turning On and Off the 10
- 1. OPERATION 11
- 1.3 Adjusting Display 11
- Contrast and Brilliance 11
- Plotter 1 display 12
- Plotter 2 display 12
- Navigation display 13
- : North mark 14
- : Demonstration display 14
- : Alarm is violated 14
- 2.1 Enlarging/Shrinking the 15
- Display 15
- 2.2 Selecting Display 15
- Orientation 15
- 2.3 Shifting the Cursor 15
- 2. TRACK 16
- Cursor turned off 16
- 2.10 Apportioning the 19
- 2.11 Selecting Bearing 20
- Reference 20
- Entering magnetic variation 20
- 3. MARKS 21
- 3.2 Selecting Mark Shape 22
- 3.3 Connecting Marks 22
- (selecting mark connection 22
- 3.4 Entering Event Marks 23
- 3.6 Entering the MOB Mark 24
- 4. NAVIGATION 25
- PLANNING 25
- 4. NAVIGATION PLANNING 26
- Registering waypoints by MOB 27
- ]) 3, 4, 1, 2, 3, 4. 5 28
- ]) 1, 3, 5, 2, 3, 4, 5, 6 28
- 4.2 Editing Waypoints 29
- 4.4 Registering Routes 30
- 4.5 Deleting Route 31
- Waypoints 31
- 4.7 Deleting Routes 32
- 5. STARTING FOR 33
- DESTINATION 33
- Repeat steps 34
- on the 35
- • By selecting route 36
- 5.2 Canceling Destination 37
- 5.3 Erasing Route 38
- Waypoints (flags) 38
- When flags are erased 38
- 5.4 Finding Range and 39
- Bearing Between Two 39
- 5. STARTING FOR DESTINATION 40
- 6. SETTING UP 41
- VARIOUS 41
- DISPLAYS 41
- Displaying LOPs 42
- to display LOPs 43
- 6.3 Demo Display 44
- 7. ALARMS 45
- 7.2 Cross Track Error (XTE) 46
- 7.3 Ship’s Speed Alarm 47
- 7.4 Trip Alarm 47
- 7.5 Water Temperature 48
- 7.6 Depth Alarm 48
- 7.7 WAAS/DGPS Alarm 48
- 8. MENU 49
- SETTINGS 49
- Selecting fix mode 50
- to switch from 51
- 5) If necessary press 51
- 8. MENU SETTINGS 52
- Entering position 52
- 8.3 Mark, Character Size 53
- 23.456' 54
- DATA 2 output setting 55
- DATA 3 output setting 55
- Setting DATA 4 to NMEA 56
- 9. MAINTE 61
- NANCE & 61
- TROUBLE 61
- SHOOTING 61
- 9.2 Preventive Maintenance 62
- DGPS error 63
- 9.4 Troubleshooting 64
- 9.5 Diagnostic Tests 65
- Memory and I/O circuits test 65
- Display test 66
- MENU TREE 67
- APPENDIX 68
- Time Diff. (+00:00) 69
- DIGITAL INTERFACE 70
- 4. Lon offset, min, E/W 78
- TIME DIFFERENCES 87
- GEODETIC CHART LIST 88
- LORAN C CHAINS 89
- DECCA CHAINS 90
- PARTS LIST 91
- Parts Location 92
- GP-150/Dual 93
- SP-2 E4440S01A-M 94
- Position-fixing Accuracy 1-2 96
- Declaration of conformity 97
Related products and manuals for Navigational compasses Furuno GP-150
Navigational compasses Furuno SC-60 User Manual
(106 pages)
(106 pages)
© 2020, manymanuals.com. All rights reserved. | 0.309 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals