Furuno GP-36 User Manual download pdf (Page 52)

7-12

6. Press the [ENT] key.

Note: The waypoint and route data are

deleted when the [ENT] key is pressed.

Figure 7-28 Display when data

is being loaded

7. When the loading is completed, the fol-

lowing message appears.

Figure 7-29 Display when data

is loaded successfully

8. Press any key to escape.

Loading data from a YEOMAN

Waypoint data from a YEOMAN has the

same format as does the NMEA 0183 data

sentences WPL.

1. Press the [MENU] key twice, select I/O

SETUP and press the [ENT] key.

2. Select LOAD WP ← YEOMAN?.

3. Press the [ENT] key.

Figure 7-30 LOAD WP/RTE display

4. Press the [ENT] key.

Figure 7-31 LOADING START? prompt

5. Set up the YEOMAN to output data.

6. Press the [ENT] key.

Figure 7-32 Display when data

is being loaded

7. Press the [ENT] key to start the load-

ing. Data is loaded to empty location and

the buzzer sounds twice to signify suc-

cessful loading. If there is not enough

memory free to store the waypoints the

message below appears.

Figure 7-33 Display when waypoints

could not be loaded

Waypoint data format

Figure 7-34 Waypoint data format

1: Waypoint latitude

2: N/S

3: Waypoint longitude

4: E/W

5: Waypoint name (Number of characters

is fixed to 6 and space code is placed

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 80 81

Comments to this Manuals

No comments