Furuno GP-36 User Manual download pdf (Page 43)

7-3

Note: When connecting a FURUNO

external DGPS beacon receiver (such

as GR-80) to the GP-31, turn the GR-

80’s remote function on to set up the

beacon receiver with data set on the

GP-31.

5. The cursor is on the STATION field.

Press the [ENT] key.

6. Choose DGPS beacon station selection

method: AUTO, MANUAL or LIST.

AUTO: Automatically searches for

best of five nearest DGPS beacon

station. It first searches DGPS beacon

stations from closest to furthest. If

unsuccessful it searches stations by

signal strength. This procedure is

repeated until a suitable station is

found.

MANUAL: Manually enter DGPS

beacon station specifications in the

RATE and FREQ fields, referring to a

DGPS beacon station list.

LIST: Lists 5 of the closest DGPS

beacon stations, including user-pro-

grammed stations.

7. Press the [ENT] key. If you selected

AUTO no further operation is required;

press the [ENT] key to finish. For

MANUAL or LIST do one of the follow-

ing:

MANUAL

a) The cursor is now on the RATE

field. Press the [ENT] key.

b) Select the transmission rate of the

DGPS beacon station to be used,

among 50, 100 or 200 bps. Press

the [ENT] key.

c) The cursor is now on the FREQ

field. Press the [ENT] key.

d) Enter the transmission frequency

of the DGPS beacon station to be

used and press the [ENT] key.

LIST

a) The following display appears after

pressing the [ENT] key at step 7.

Figure 7-8 DGPS beacon station list

b) Select desired station with the

Cursor Pad.

c) Press the [ENT] key.

11.Press the [MENU] key twice to finish.

Note that the STATION field in the DGPS

menu now shows MANUAL.

Programming user channels

(stations)

The user may program 20 DGPS beacon

stations from which to use in DGPS bea-

con station selection. Whenever a new sta-

tion is constructed you include it in the list.

1. Press the [MENU] key twice to open the

menu.

2. Select DGPS and press the [ENT] key.

3. Select STATION and press the [ENT]

key.

4. Select LIST and press the [ENT] key.

The display shown in Figure 7-8 ap-

pears.

5. Select USER and press the [ENT] key.

The following display appears.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 80 81

Comments to this Manuals

No comments