Furuno FAR-2807 User Manual download pdf (Page 4)

1.3 Trail Color Shift

When there are many trails on the screen, especially when using long trails, it is diffi-

cult to distinguish past tracks from current tracks since they are the same color. With

the trail color shift feature, tracks are painted in a different color from the point when

color shift is activated. For example, the current track color is 1: FUCHSIA. Then, at

the moment the trail color shift is made active, trails from that point will be painted in

2: MAROON.

Note: At the moment the trail color shift is activated, the trail colors in effect after the

time set in the TRAIL MODE box are erased. For example, the trail length is 12

HOURS and the time set in the TRAIL MODE box is 05:00. Then, using the illustration

above as an example, 6: LIME will not be shown.

2 TRAIL GRAD in the TRAIL menu must be set to SINGLE and 8 TRAIL LENGTH to

other than NORMAL in order to activate the trail color shift feature.

1. Right-click the TRAIL MODE box.

2. Select 0 [TRAIL COLOR] then push the left button.

3. Select 2 COLOR SHIFT then push the left button.

4. Select YES then push the left button.

5. Push the right button twice to close the menu.

Target

Echo trail

1:FUCHSIA 2:MAROON 3:RED 4:PPL 5:YEL

2:MAROON

3:RED 4:PPL 5:YEL 6:LIME

Trail color before shift

Trail color after shift

Fuchsia color

displayed up to

this point

Target

[TRAIL

COLOR]

1 BACK

2 COLOR SHIFT

NO/YES

3 TRAIL COLOR

1: FUCHSIA

2: MAROON

3: RED

4: PURPLE

5: YELLOW

6: LIME

7: GREEN

8: OLIVE

9: TEAL

10: CYAN

11: BLUE

12: NAVY

1 2 3 4 5 6 7 8 9 ... 51 52

Comments to this Manuals

No comments

Furuno FAR-2807 User Manual Page 4

Comments to this Manuals

Related products and manuals for Boating Accessories Furuno FAR-2807