Furuno FAR-2807 User Manual download pdf (Page 35)

6. To edit mark position, select 2 POSITION then push the left button.

7. Spin the scrollwheel to select numeric. Numeric may also be directly entered in

case of keyboard-equipped control unit. After setting position, the values entered

are colored blue.

8. Select 3 CONFIRM then push the left button.

The comment entered is placed next to on-screen mark. If the position of the mark

was changed mark appears at the newly entered position.

9. Push the right button to finish.

Selecting mark color

Mark color is available in red, green, blue, yellow, cyan (light-blue), magenta, and

white.

1. Use the trackball to put the cursor on the arrow in the MARK box at the bottom left-

hand corner.

2. Push the right button to show the MARK (1/2) menu.

3. Spin the scrollwheel to select 0 NEXT then push the left button.

4. Select 3 MAP MARK COLOR then push the left button.

5. Spin the scrollwheel to select color desired then push the left button. Selected color

appears below the MARK box.

6. Push the right button twice to close the menu.

All marks entered after changing mark color will be colored in the newly selected color.

[MARK MENU(2/2)]

1 BACK

2 MAP DISPLAY

OFF/ON

3 MAP MARK COLOR

RED/GRN/BLU/YEL/

CYA/MAG/WHT

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 51 52

No comments

Furuno FAR-2807 User Manual Page 35