Furuno FAR-2807 User Manual download pdf (Page 10)

5. Select 2 CURSOR then push the left button.

6. Select ON then push the left button to enable the net cursor. EBL2 is then auto-

matically turned on.

7. Push the right button four times to close the menu.

Setting net cursor dimensions, adjusting net cursor

orientation

1. Left-click the MENU box.

2. Select 2 [MARK] then push the left button.

3. Select 9 [EBL, VRM, CURSOR SET] then push the left button.

4. Select 8 [ CURSOR SHAPE] then push the left button.

5. Set net cursor dimensions as follows, refer-

ring to the illustration at right.

1) Select FRONT HALF LENGTH then push

the left button.

2) Spin the scrollwheel to set front half length

(0-3000 m) then push the left button.

3) Set REAR HALF LENGTH and NET WIDTH

similarly.

Warp length (a+b in the illustration at right) is

indicated at the bottom of the menu. The net

cursor is placed at the screen center, with its

top and bottom points bisected by EBL2. To

adjust the position of the net cursor, go to step

6. Otherwise, go to step 9.

6. Select 6 ROTATE STEP then push the left button.

7. Select 360° or 32 POINTS as appropriate then push the left button. These figures

determine how finely to rotate the EBL2 when adjusting the orientation of the net

cursor. Select 360° for fine rotation or 32 POINTS for coarse rotation.

8. Use the rotary encoder for the EBL to adjust the orientation of the net cursor.

9. Push the right button four times to close the menu.

[ CURSOR SHAPE]

1 BACK

2 CURSOR

OFF/ON

3 FRONT HALF LENGTH

0.0m

4 REAR HALF LENGTH

0.0m

5 NET WIDTH

0.0m

6 ROTATE STEP

360°/32 POINTS

WARP LENGTH

0.0m

FRONT HALF

LENGTH

REAR HALF

LENGTH

NET WIDTH

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

Comments to this Manuals

No comments

Furuno FAR-2807 User Manual Page 10

Comments to this Manuals

Related products and manuals for Boating Accessories Furuno FAR-2807