Furuno FR-1710 User Manual Page 17
- Page / 78
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
1-3
1.4 CRT Brilliance
Operate the BRILL control on the control
panel of the display unit to adjust the entire
screen brightness. Note that the optimum
point of adjustment varies with ambient light-
ing conditions, especially between daytime
and nighttime.
1.5 Control Panel Backlighting
1. Press the [MENU] key.
MENU
1. VIDEO PLOT
2. TGT TRAIL
3. TGT ALARM
4. PANEL DIM
5. ECHO SIG
6. FUNC
7. PLOT
8. MARK
9. BRILL
0. OTHER
Figure 1-3 Main menu
2. Press the [4] key twice. The following dis-
play appears.
DIMMER
1. PANEL BRIGHT 7 6 5 4 3 2 DIM
Figure 1-4 Screen for adjustment
of panel dimmer
3. Press the [1] key to select backlighting
level desired.
4. Press the [ENTER/SELECT] key to reg-
ister your selection and the [MENU] key
to close the menu.
1.6 Tuning the Receiver
The radar is set for automatic tuning at the
factory.
Automatic tuning
The radar receiver is tuned automatically
each time the transmitter is turned on. The
tuning indicator and the label AUTO at the
top right corner of the display unit shows the
tuning circuit is working. The receiver may
become detuned, in automatic tuning, if own
ship’s radar receives the radar signal of an-
other shipborne radar. To retune, press the
[STBY/TX] key twice.
Manual tuning
1. Set up for manual tuning following the
procedure shown below.
2. While observing the picture on the 48 mile
scale, press and hold down the GAIN
control while slowly adjusting the VRM ro-
tary control to find the best tuning point.
This condition is where the tuning indica-
tor lights to about 80% of its total length.
Note that the tuning indication will never
extend to full length.
Selection of manual or automatic
tuning
1. Press the [MENU] key.
2. Press the [0] key twice to display the
OTHER menu.
OTHER
1. HDG SET
2. SPD MODE MAN LOG NAV
LOG (S-BT)
LOG (S-WT)
3. MAN SPD
4. DRIFT SET
5. DISPLAY
6. MARK/LINE
7. TUNE
8. NAV DATA
9. EBL/VRM
0. ↓
Figure 1-5 OTHER menu
- MARINE RADAR 1
- PUB. No. OME-34530 2
- FIRST EDITION : NOV. 1998 2
- L : APR. 9, 2001 2
- SAFETY INSTRUCTIONS 3
- ELECTRICAL SHOCK HAZARD 4
- TABLE OF CONTENTS 5
- INTRODUCTION 7
- SYSTEM CONFIGURATION 8
- FR-1710/1725 9
- MENU TREE 10
- OPERATIONAL OVERVIEW 15
- origin to measure range 16
- Figure 1-3 Main menu 17
- Figure 1-5 OTHER menu 17
- Figure 1-6 TUNE menu 18
- Figure 1-7 OTHER menu 18
- 9/22 19
- TEMP 20.1°C 19
- DEPTH 123.5M 19
- AUTO 19
- 1.10 Presentation Modes 20
- True Motion Mode 22
- Figure 1-9 OTHER menu 23
- Figure 1-10 Echo stretch 24
- Figure 1-11 How to adjust 26
- Figure 1-13 Interference 27
- Figure 1-14 ECHO SIG menu 27
- Figure 1-15 How to measure 28
- Figure 1-16 How to measure 29
- Figure 1-19 TGT ALARM menu 30
- Figure 1-20 Target alarm 31
- Figure 1-23 ECHO SIG menu 32
- Figure 1-24 Echo averaging 32
- will help for assessment 33
- Target data 34
- Terminating target plotting 34
- Setting CPA/TCPA alarm ranges 35
- Lost target alarm 35
- Past plot points 36
- True or relative trails 36
- Trail gradation 37
- Selecting trail time 37
- Restoring trails 37
- Resetting target trails 38
- Trail brilliance 38
- Thin trails 38
- Trail afterglow 38
- 1.27 Parallel Index Lines 39
- 1.28 Origin Mark 39
- 1.29 Zoom 40
- 1.30 Markers 40
- Figure 1-39 FUNC menu 41
- Figure 1-40 Function menu 41
- Table 1-2 FUNC key objectives 42
- Figure 1-41 FUNC menu 42
- Figure 1-42 FUNC1 menu 42
- 1.33 Suppressing Second-trace 43
- Echoes 43
- 1.34 Adjusting Brilliance of 43
- Screen Data 43
- 1.35 Noise Rejector 44
- 1.36 Time Alarm 44
- 1.37 Enhanced Video 44
- 1.38 Degaussing Interval 45
- 1.39 Navigation Data 45
- 1.40 Video Contrast 46
- 1.41 Clutter Sweep 46
- 1.43 Background Color 47
- 1.44 Selecting Range Scales 47
- 1.45 Selecting Bearing Scale 47
- Format 47
- 1.46 A/D Converter Curve 48
- Setting 48
- 1.48 Alarms 49
- 1.49 Peformance Monitor 50
- RADAR OBSERVATION 51
- 2.2 False Echoes 52
- 2.3 SART (Search and Rescue 53
- Transponder) 53
- Screen A: When SART 54
- is distant 54
- Screen B: When SART 54
- is close 54
- 2.4 RACON (Radar Beacon) 55
- MAINTENANCE, TROUBLESHOOTING 56
- 3.3 Fuse Replacement 58
- 3.4 Replacement of Batteries 58
- 3.5 Simple Troubleshooting 58
- Serviceman qualification 59
- Service call 59
- 3.7 Diagnostic Test 62
- PARTS LOCATION 65
- SPU Board 66
- FR-1760DS Scanner Unit 67
- FR-1760DS Power Supply Unit 69
- RF module (Upper part) 70
- Module (Lower part) 71
- FR-1710/1725/1760DS 72
Related products and manuals for Radar detectors Furuno FR-1710
Radar detectors Furuno MFD8 User Manual
(12 pages)
(12 pages)
Radar detectors Furuno FAR-2107 User Manual
(52 pages)
(52 pages)
Radar detectors Furuno FR-2135S User Manual
(82 pages)
(82 pages)
Radar detectors Furuno FR-2125V User Manual
(90 pages)
(90 pages)
Radar detectors Furuno FR1500 Mk3 User Manual
(120 pages)
(120 pages)
Radar detectors Furuno 1623 User Manual
(47 pages)
(47 pages)
Radar detectors Furuno CSH-23/24 User Manual
(109 pages)
(109 pages)
Radar detectors Furuno CSH-23F/24F User Manual
(114 pages)
(114 pages)
Radar detectors Furuno CH-250 User Manual
(118 pages)
(118 pages)
(12 pages)© 2020, manymanuals.com. All rights reserved. | 1.143 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals