Furuno FR1500 Mk3 User Manual download pdf (Page 38)

-1.26-

1.26.5 Restoring trails

Trails are cancelled and restarted whenever the range is changed. However, you can continue

trails on the same range, without restarting, when the range is changed to a next larger or smaller

range scale. Note however that when the range is changed, only those target trails within the

previous range are continued; no trails are generated for targets outside of the previous range.

1. Press the [MENU] key.

2. Press the [2] key twice to select

TGT TRAIL.

3. Press the [5] key to select ON from

the TRAIL COPY field.

4. Press the [ENTER/SELECT] key

and [MENU] key in order.

1.26.6 Resetting target trails

To reset (or clear) the target trail memory, hold the [TGT TRAIL] key depressed for about 3

seconds. Target trails are cleared and the trailing process restarts from time count zero at current

target trail plot interval.

1.26.7 Trail brilliance

The brilliance of target trails can be adjusted on the BRILL menu as follows:

1. Press the [MENU] key.

2. Press the [9] key twice to display the BRILL menu.

1. TGT TRAIL

2. CHARACTER

3. HDG LINE

4. EBL/VRM

5. CURSOR

6. MARK

7. PLOT

8. OS SYMB

9. ↓

BRILL

Menu item No. 9 requires RP-17 board.

3. Press the [1] key to select TGT TRAIL.

4. Operate the VRM rotary control to adjust brilliance. Current brilliance is shown by the bar

graph.

5. Press the [ENTER/SELECT] key to conclude your selection followed by the [MENU] key to

close the menu.

(a) Previous range (b) New range

No trail generated for targets

not within previous range

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 119 120

No comments

Furuno FR1500 Mk3 User Manual Page 38