Furuno FEA-2100 User Manual

1ECDIS FEA-2100/2105 ENC Chart (Japan Maritime Safety Agency） Update Manual ・ Update chart before embarking on a voyage. D

10The error message may appear during conversion, however leave the message displayed until the conversion is completed. The list in the

23. Check the box on [Automatic SENC conversion] and [Automatic Display Unit]. (Or confirm that the check marks are displayed.) To check the box, pla

35. Place the cursor on an alphabet or number button and press the [SELECT] key. Repeat this to enter catalogue name. Set a name which is easy to und

43. Displaying the Catalogue Chart 1. Press the [CHART PLAN] key to display the menu. 2. Place the cursor on the [Catalogue] and press the [SELEC

56. Set the chart group to update as follows. a. Place the cursor on the [Groups] button at the bottom of the [Catalogue] window and press the [SELE

6e. Place the cursor on the [Add Frame] button and press the [SELECT] key. f. Rotate the trackball to place the cursor inside the chart cell frame de

74. Chart Conversion (from ENC format to SENC format) The chart data in a CD-ROM (ENC format) must be converted to SENC format in order to dis

86. Place the cursor on the [Missing only] check box and press the [SELECT] key to display the check mark. 7. Place the cursor on the [Load] button a

9After loading all charts desired, the chart conversion (from ENC to SENC) automatically starts. 8. At this time, the message [No Base Cell availabl