Furuno FA-150 User Manual download pdf (Page 27)

3.3 Setting GPS Antenna Position

1. Open the INITIAL SETTINGS window, referring to step 1-3 in "Setting blue

status" on page 18 - 19.

2. Press ▲ or ▼ key to choose SET INT ANT POS. and press the [ENT] key.

[SET INT ANT POS.]

QUIT[MENU]

SET INT ANT POS. sub-menu

(Data entry)

A: 0 m

B: 0 m

C: 0 m

D: 0 m

C D

3. Press the [ENT] key again.

4. Use the cursor pad to enter the distance for “A” of the FA-150 GPS antenna

then press the [ENT] key.

A: Distance from bow to GPS antenna position, setting range: 0-511 m

5. Press the [ENT] key and enter distance for B, C and D, similar to how you did

for "A" above.

B: Distance from stern to GPS antenna position, setting range: 0-511 m

C: Distance from port to GPS antenna position, setting range: 0-63 m

D: Distance from starboard to GPS antenna position, the setting range: 0-63 m

6. Press the [MENU] key to return to the INITIAL SETTINGS menu.

7. Press ▲ or ▼ key to choose SET EXT ANT POS and press the [ENT] key.

8. Enter distance for location of an external GPS antenna (if connected) similar to

how you did for the internal GPS antenna.

9. Finally press the [MENU] key to save the settings.

Notes

• Use "Length Over All" (not "Length Between Perpendicular") to express the

dimensions for A and B.

• The sum of A+B (Length Over All) must be the same for both INT ANT POS. and

EXT ANT POS.

• The sum of C+D (Width) must be the same for both INT ANT POS. and EXT ANT

POS.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 57 58

No comments

Furuno FA-150 User Manual Page 27