Furuno FSV-30S User Manual download pdf (Page 15)

1-9

Mounting procedure

1. Unfasten two bolts from the bottom of the front side of the processor unit. Pull the unit

toward you to separate it from the mounting base.

2. Use six bolts (M6×20, supplied as installation material) to fix the mounting base.

3. Place the processor unit in front of the mounting base.

4. Push the unit forward until it touches the end of the mounting base.

5. Refasten two bolts removed at step 1 to fix the unit to the mounting base.

504

477

5.5

160+1

200+1

195+1

Front view Top view

Processor unit

1.3 Control Unit

The control unit may be mounted on a tabletop with or without the KB (keyboard) fixing

plate (supplied), which mounts the control unit at an angle. If the control unit is not to be

fixed permanently, lay it atop the rubber feet (supplied as accessories). Be sure to observe

the compass safe distances noted on page ii to prevent interference to a magnetic

compass.

(1) Rubber feet

Attach four rubber feet to the bottom of the control unit if it is not going to be permanently

fixed.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 79 80

No comments

Furuno FSV-30S User Manual Page 15