Furuno GP-3300 User Manual download pdf (Page 50)

4-3

4. Enter latitude.

Cancel entire line of data: Press the [CLR] key.

Change data: Place data input cursor on wrong data, and then

reenter data.

Switch coordinates: [+] key, changes coordinate to North or East,

[-] key, changes coordinate to South or West.

5. Place the data input cursor to the first digit of longitude and then

enter longitude.

6. Enter comment, if desired.

Note: Waypoint comment can be entered on the Waypoint List.

See 4.2 Entering a Waypoint Comment.

7. Press the [ENT] key.

Waypoint entry by cursor

1. Press the [WPT] key to display the REGISTER WAYPOINT

menu.

MODE = CURSOR L/L OS POS. R/B LIST

WPT NO. = − −

ENTER WAYPOINT NO., AND DESIGNATE WAYPOINT POSITION BY

USING CURSOR. + : DISPLAY

− : NOT DISPLAY

Figure 4-3 REGISTER WAYPOINT menu

2. Select CURSOR from the MODE field, if it is not already se-

lected.

3. Select WPT NO.

4. Enter waypoint number in two digits. If the waypoint number is

07, for example, press [0] and [7].

Note 1: If the waypoint number is already used, “(USED)” appears

to alert you. You can enter a new number by pressing the [CLR]

key, or overwrite the waypoint number by going to step 5.

Note 2: You can register a waypoint without entering waypoint

number, in which case the unit automatically registers the waypoint

in the youngest, unused waypoint. For example, if waypoints 01,

02, 04 and 05 are used when you enter a waypoint without

designating waypoint number, the unit will automatically register

that waypoint as waypoint number 03.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 136 137

No comments

Furuno GP-3300 User Manual Page 50