Furuno GP-1850W User Manual download pdf (Page 12)

1. OPERATIONAL OVERVIEW

1-4

When the satellite signal is being received

normally, the GP-1850WD/1850W displays

various abbreviations at the bottom left-hand

corner of the display which show DGPS/GPS

receiver status. The table in below shows

these abbreviations and their meanings.

Display abbreviations

Indication Meaning

GPS 2D

2D (dimension) GPS

position fix

GPS 3D 3D GPS position fix

DGPS 2D

(GP-1850WD)

2D differential GPS

position fix

DGPS 3D

(GP-1850WD)

3D differential GPS

position fix

NO FIX

Position cannot be

found.

DOP DOP error

DEMO Simulation mode

GPS W2D 2D WAAS position fix

GPS W3D 3D WAAS position fix

Turning the power off

Press and hold down the [POWER/BRILL]

key until the screen goes blank. The time

remaining until the power is turned off is

shown on the screen.

Note: The example screens shown in this

manual may not match the screen you

see on your display. The screen you

see depends on your system

configuration and equipment settings.

1.5 Adjusting Tone and

Brilliance

1. Press the [POWER/BRILL] key with a

touch-and-release action. The tone and

brilliance setting window appears.

TONE

BRILL

TONE

TONE

BRILL

BRILL

RETURN

Tone and display brilliance setting window

Functions

Soft keys

Tone and brilliance adjustment window

2. Press ◄ or ► on the cursor pad to adjust

display tone.

3. Press ▲ or ▼ on the cursor pad to adjust

display brilliance.

Note that tone and brilliance can also be

adjusted by soft keys. After pressing the

[POWER/BRILL] key, use the appropriate

soft key to adjust tone or brilliance.

Note: Tone or brilliance must be adjusted

within 10 seconds after pressing the

[POWER/BRILL] key or the tone and

brilliance adjustment window will be

erased.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 97 98

Comments to this Manuals

No comments